Diamant cutting wheel

sharpening your pole ends with tools like "Dremel" or "Proxxon".

• Pistondiameter: 3,2 mm for Dremel, Proxxon etc.
• Diskdiameter: 22 mm, completely diamoncoated
• Thickness of the disk: 0,6 mm
• Wear protection glasses during work!

These foil reflectors for Cross-Skating poles are a very effective safety feature. The set contains 4 stickers for 2 pairs of poles. They are a cheap way to skate more safely just after dusk or at sunset. Even during the day cross-skating within a group will be safer because most dark pole ends will be easier to see.

Replacement straps for KV+ poles with clip

This strap is suitable for all Clip-System poles by KV+, eg Viking, Tempesta, Forza, or CH-1 models.

Sizes: S (up until approx. glove size 7½)

           M/L (up until approx. glove size 8-9½)

           XL (from approx. glove size 10)

Replacement straps for KV+ poles. This strap is suitable for all Clip-System poles by KV+, eg Viking, Tempesta, Forza, or CH-1 models.

Sizes: on size for all - adjustable size from glove size 7½ to 11

Spare straps for KV+ poles. These straps are suitable as replacements for all KV+ poles without clip-system, eg Campra, Advance or Alu Top models. We also stock suitable wedges for attachment, in case you have lost yours.

Sizes: S (up to approx. glove size  7½)

           M/L (approx. glove size 8-9½)

           XL (from approx. glove size 10)

KV+ Wedge for attaching hand straps onto pole grips without Clip-System by KV+, eg Campra, Advance or Alu Top pole models.

Spare Handle for KV+ pole. These handles are suitable for as a replacement for all Clip System poles by KV+, eg Viking, Tempesta or CH-1. They have a thermo cork surface, which can also be repaired.

Spare grips for KV+ poles. These racing grips are suitable as a replacement for all KV+ poles with Clip-System, eg Viking, Tempesta or CH-1 models. They have a natural cork surface, which many Cross-Skaters find have a pleasant feel, but which can't be repaired as easily as the thermo cork.

Pipe cutter for prossenional pole shortening. Aluminium poles are very easy to cut but please take care when cutting carbon fibre poles. Alway work with an extremely sharp blade and very slowy tighten.

Our tip: You can sharpen the pipe cutter blade very easily with our diamond file. You should sharpen the blade especially when you cut expensive poles. You might have to saw off the last fraction of a millimeter carefully with a thin, sharp, fine metal saw.

We recycle this cork material from faulty pole handles. Originally intended only for our own workshop, we now offer this material to our customers for their own repair work. The cork is heated with a hair dryer or heat gun and then moulded onto the pole handle.

Our video tutorial (in german laguage): Werkstattvideo über Reparaturen mit Thermokork

By this means, wornt through and damaged pole handles can be used for much longer. The amount supplied is sufficient for about two holes the size of a 2-Euro coin.

Note: Only suitable for thermocork repairs. Not for lighter natural cork (see Video).

Bag with about 3 grams of thermo cork.